Square fin placement

When we decided to add a Layout Square to our range we wanted a Square that you could reduce other tools in the shaping room and use this instead!
So we sat down with Robin Mair from Gearbox Surf/ Hanalei fins and worked out everything you would need to put fins in and measurements while building a board.
This Layout Square was the result!
So what's different to other layout squares?
- Its bigger - 14 inch instead of 12 inch so when doing Quads and other fin placements you can do all your measurements without moving the square, reducing time and mistakes.
- You can still do your "Foot from the tail/ Foot from the nose" measurements because of the laser cuts wide enough to put your pencil in.
- Its strong! Made from Polycarbonate instead of Acrylic so if you drop it, its harder to break.
- You can actually use it to measure in the fin placements!! Laser cuts to fit your pencil and a hole to put your guide on the rail so both side fins can be exactly the same angle and measurement. Its a great Fin Marking jig!!
- Has Inches and 1/2 inch measurements
- Designed by Robin Mair from Gearbox Surf - a Fin Designer/ Hand Shaper, so its a Shaper tool made by a Shaper! Though its made by a professional ruler company so its accurate
Exclusive to Sanded Australia
More in this Collection
Polystyrene Foam Blanks
Riley Balsa Wood Surfboards

Balsa surfboard shaping set or kit
Riley Balsa Wood Surfboards

Cedar and Balsa Nose and Tail blocks
Riley Balsa Wood Surfboards
Balsa and Cedar Stringers
Riley Balsa Wood Surfboards
Aust made longboard fin boxes
Riley Balsa Wood Surfboards

Pinch & Roll Surfboard Holder
Riley Balsa Wood Surfboards

Thruster/ Quad fin box sets
Riley Balsa Wood Surfboards

Timber fin blanks
Riley Balsa Wood Surfboards

Vacuum plastic bags or poly tubing 850mm
Riley Balsa Wood Surfboards
Balsa Hand Boards Planes
Riley Balsa Wood Surfboards

Rail saver pro tape for SUPs, Nipper and race Mals
Riley Balsa Wood Surfboards
