Balsa surfboard shaping sets or kits

$400.00 $450.00

Choose your option below

Quantity

Our shaping kits start from only $400 AUD and include everything you need to shape your own balsa board (except tools*) Please note that the four or five piece balsa shaping kits are suitable for thin boards & flat rocker only - you must draw and cut your rocker on the narrower side of the timber to get the required width in the board.

You can choose between a light weight modern kit or a solid heavy classic kit.

Foam core kits include-

This surfboard kit comes with everything you need (see bottom of page) to successfully make your own lightweight, strong longboard. Suitable for beginners up to the very advanced shapers.

Please note: Hollow boards are very difficult to make without any real benefits and they need to be well maintained and they are difficult to repair, they are also very limited to your custom shape – we only do solid and foam core!

The solid kit includes -

Balsa Wood

Cedar stringer to suit board with rocker

Nose and Tail blocks

PVA glue

DVD. Building a Solid balsa board

Balsa coloured putty

100 and 60 grit sand paper.

Large and small balsa sanding blocks

Tape for bands and nose and tail blocks

Surf Magazine

Paint Brushes for glue

Pen for drawing on balsa

Dust Mask

Mark,

We still have one more sanding to do--- but this is the finished board.

Your wood is amazing. Thank you.

We used some redwood for the nose and tail.

I shot the photo after dark, when we finished, sorry about the lighting.

We appreciate all your efforts to help us.

We never would have gotten there without your clear, detailed DVD, your patience with our questions and perfect wood.

Thank you,

Scott Marshall

1407 Flintridge Rd

West lake Hills, Texas

USA

What’s included in the Riley Foam Core Balsawood Board Kit!

This kit is the same method for making any sort of board that your imagination can create.

The following check list is what is included. Please check this when it arrives and let me know if there is something missing. Do not leave pack or glues in sun or hot cars.

Recycled EPS foam blank cut with rocker curves

2 sheets of 2.8mm laminated balsa sheets x 500mmx mm – for deck and bottom.

4 lengths of 6mm thick solid balsa bands for rails

Perfecto glue for balsa and foam with instructions

Solid balsa tail and nose blocks

Balsa coloured putty

100 and 60 grit sand paper

Large and small balsa sanding blocks

Tape for bands and nose and tail blocks

Dust mask

3 Glue scrapers

DVD. Building a foam core balsa board